Fail safe/fail secure changeable on site.
The ES2000 series electric strikes are fully monitored high security products manufactured from stainless steel and designed for use with all access control systems. The strikes are suitable for use with hinged doors which require either fire or security control as part of a building management system.
These strikes are flexible and can be changed from fail safe to fail secure, mounted on the left or right hand side of the door and are available in 12Vdc.
They offer a strong, dependable and long-lasting electric strike solution with a 850kg holding force and endurance rating of 1 million cycles.
Key Features
Applications
Standards and Compliance
Trimec ES2000 Series Monitored Electric Strike
Voltage
12Vdc
Current
175 mA @ 12Vdc
Solenoids
Solenoids are rated for continuous use
Monitoring
Solenoid Monitor - 1 amp NO/NC microswitch
Door/Latch Monitor - 1 amp NO/NC microswitch
Holding Force
850kg Static Strength Rating
Endurance
Cycle tested to 1,000,000 operations
Latch
Suitable for 15mm latch bolt with 3mm door gap
Environment
Operational temperature range - 20°C to +60°C
Body
Solid Stainless Steel Construction
Keeper
Stainless Steel
Specification Statement
The strike should be constructed of solid stainless steel, have a minimum holding force of 850kg and have an endurance rating of 1 million cycles. Monitoring must include independent door / latch& solenoid monitoring. The one strike must be changeable from fail safe to fail secure on site where required. The strike should not consume current greater than 175mA at 12Vdc and have a solenoid rated for continuous use.
Dimensions
Item | Part number |
---|---|
12V Fail Safe Electric Strike | 112001-000 |
12V Fail Secure Electric Strike | 112002-000 |
12V ES2400 Fail Safe Electric Strike | 112401-000 |
Accessories - 13mm Rebate Plate | 210100-541 |
Accessories - Mounting Kit | 220200-519 |
Note: If Extension Lips are required, use ES2100 Electric Strike (Refer to catalogue) |